Part One – When to Use Platen Covers

If you’ve recently purchased an HP Latex Printer, there are some important tools you may not be using that can make printing a little easier: platen covers, counterweights, butterfly edge guards, and spindles.

In part one of our four-part series, we’ll discuss when to use platen covers.

Long, unattended runs on the latex printer is a great way for print service providers to complete large projects while staying on schedule with short runs or quick custom jobs. However, some PSPs experience issues when continuous runs are printed on fabric.

Because the media is porous and a heavier ink load is required (185-200% coverage), condensation can build up between the fabric and the platen and stain the image.

Timothy Mitchell, HP Latex Specialist, says that the platen covers, which are included with the Latex 365 or 500 series, are made specifically to reduce the condensation during these runs.

“These are there to prevent the accumulation of condensation and creating a discolored stain,” he says. “If I’m going to run an entire roll for a trade show, I will put these on because I am going to run continuously, and it will create a lot of moisture and the felt [on the platen cover] is necessary.”

Watch the video above to see Mitchell discuss the proper times and ways to use the platen covers. If you have an older 300 series printer, you can contact HP Latex Support.

If you have questions or are interested in learning more about printing with latex, contact a LexJet printer specialist at 800-453-9538 or visit LexJet.com.