LexJet has just introduced Simple Perforated Window Vinyl (70/30) to complement its Simple Perforated Window Vinyl (60/40) offering. The 70/30 offers more print area for that extra punch at retail; 60/40 is best for applications – like vehicle windows – that require more visibility looking out the window.

Simple Perforated Window Vinyl (70/30) is a 6-mil perforated vinyl designed to stop people in their tracks outside a store and lure them inside. Once inside, shoppers can see outside, and see quite well since the vinyl also cuts down on sunshine glare.

The two-layer perforated liner allows trouble-free printing for shops with UV-curable printers. “We printed some large panels and with UV-curable printing we have to make sure that your ink stays on the liner and doesn’t come off and fill the hole. It’s an issue we’ve had with other similar products, but we haven’t seen it at all on this product,” says Ricky Shannon, operations manager for Keith Fabry Inc., Richmond, Va.

Designed to be exterior-mounted to windows, Simple Perforated Window Vinyl (70/30), is easy to handle and easy to print, install and remove. “It’s fairly low-tack when you apply it, but it becomes fairly aggressive so that it stays on the window. Then, when we peeled it back to remove it there was no residue so it works very well from installation to removal,” adds Shannon.

Use LexJet’s Optically Clear Cast Laminate or LexJet Gloss Polyester Laminate (2 Mil) for additional protection, if needed. A nice bonus is that the laminates not only protect, but will not interfere with the clarity of the image or the inside-outside view.

Simple Perforated Window Vinyl (70/30) is compatible with solvent, low-solvent, UV-curable and latex printers, and is available in 60″ x 100′ and 60″ x 20′ rolls. To find out more, and to find the right material for the application, contact a LexJet customer specialist at 800-453-9538.