Four-Part Series: HP Latex Printer Accessories

Part Two – Using the Counterweights and Take-up Reel on Your HP Latex Printer

Printing panels for trade shows can keep a latex printer and a production manager busy, but there is one tip from HP Latex Specialist Timothy Mitchell that can help lighten the load a little: use the counterweights.

“There are a couple of key pieces to successfully panel printing with the 300 series latex printer,” Mitchell says of the counterweights. If you’ve never used them, they could still be on the dancer bar for the newer 300 series printers. For the older models (310, 330, 360), you may need to contact HP Support to order a set.

When panel printing, it is more efficient and accurate to reduce the tension on the media. The dancer bar adds tension and adjusting the counterweights on either end of the bar allows you to increase or decrease the tension, depending on the media thickness and material.

Another important tool to use properly is the take-up reel. Many people may not know that there is an option to wind the graphics inside or outside.

“If you go inside, there is a little less tension than if you go outside. I usually judge it by the media,” Mitchell says.

Much like adjusting the counterweights, winding media inside or outside depends on the media.

Watch the video above to see Mitchell discuss his tips and tricks for the counterweights and take-up reel. If you have an older 300 series printer, you can contact HP Latex Support.

If you have questions or are interested in learning more about printing with latex, contact a LexJet printer specialist at 800-453-9538 or visit LexJet.com.