Setting the Scene with Wall Murals | LexJet Blog
BEGIN TYPING YOUR SEARCH ABOVE AND PRESS RETURN TO SEARCH. PRESS ESC TO CANCEL

Setting the Scene with Wall Murals

Museum Exhibit Wall Mural
This wall mural, printed on LexJet PolyGloss PSA with a Canon iPF9100 wide format printer, sets the scene for the exhibit, Star Wars: Where Science Meets Imagination. © 2012 Lucasfilm Ltd. & TM. All rights reserved. Used under authorization. Photo courtesy Orlando Science Center.

 

Wall murals are an excellent way to set the scene for any main attraction, whether it’s a special event, an exhibit, or any other venue.

LexJet Print-N-Stick Fabric
Eric Vickers, creative manager for the Orlando Science Center, first tested LexJet Print-N-Stick Fabric on various surfaces in the graphics department. Graphic design by Chris Ward. Photo courtesy Orlando Science Center.

The Orlando Science Center has recently used printed wall murals to great effect for its special exhibits, including one for the Star Wars: Where Science Meets Imagination traveling exhibit, which showcased artifacts from all six movies, and one for Sesame Street Presents: The Body exhibit.

“It’s a great entrance piece when you’re going into the exhibit. It helps theme and create an experience before you even go into the exhibit,” says Eric Vickers, creative manager for the Orlando Science Center.

For the Star Wars exhibit, Vickers used LexJet PolyGloss PSA for the walls surrounding and leading into the exhibit, printed with a Canon iPF9100 from LexJet.

“They were photorealistic images from Lucasfilm, so I really like the PolyGloss for those types of images,” says Vickers.

Vickers adds that those wall murals “got the ball rolling” to make wall murals a regular feature of the special exhibits the Orlando Science Center hosts.

Museum Wall Mural
The Orlando Science Center used LexJet Print-N-Stick Fabric for the Sesame Street Presents: The Body exhibit. Vickers says that since Print-N-Stick is not entirely opaque it’s best not to overlap the seams, especially with light-colored graphics.

“We’ve been using LexJet materials since we got the Canon iPF9100 about a year and a half ago. We like the polypropylene material better than vinyl because we can get the same pop from it as we can from paper, and it’s easy to work with,” explains Vickers.

For the Sesame Street murals, Vickers decided to try LexJet Print-N-Stick Fabric after testing it on various surfaces in the graphics department (see photos).

“It’s the best of both worlds, but opacity is the only thing we have to be careful with since it’s not completely opaque. If you overlap the seams on a graphic with a light-colored background they can show through,” says Vickers. “It’s much more repositionable than any other material we’ve worked with, and comes off the walls easily. It’s the most forgiving material we’ve worked with so far; we don’t get bubbling or imperfections in it. It’s a little trickier to cut, but it follows straight lines really well; you just have to be a little more careful going against the grain.”

Regan has been involved in the sign and wide format digital printing industries for the past two decades as an editor, writer and pundit. With a degree in journalism from the University of Houston, Regan has reported on the full evolution of the inkjet printing industry since the first digital printers began appearing on the scene.

Leave a comment

Please be polite. We appreciate that. Your email address will not be published and required fields are marked

*