Finishing Banners Quickly, Reliably & Economically | LexJet Blog
BEGIN TYPING YOUR SEARCH ABOVE AND PRESS RETURN TO SEARCH. PRESS ESC TO CANCEL

Finishing Banners Quickly, Reliably & Economically

Why sew when you can tape? Whether it’s to make pole pockets, create a seam for grommets, or to tile two pieces together for a larger banner, double-sided LexJet Heavy Duty Banner Tape provides all the advantages of sewing, plus it’s faster and is easier on the material.

Sewing perforates the banner material, which can lead to fraying and cause premature failure at stress points. Heavy Duty Banner Tape avoids this problem, and is designed to be conformable to the varying checkerboard-like patterns in the scrim.

Banner Tape application makes finishing banners a lot quicker and easier than sewing, plus it's less expensive and less damaging to the banner material.

Because it’s so conformable, it works with any material one might use for a banner, from polypropylene to fabrics. Simply mark a straight line on the back of the banner where the edge of material will fold over, apply the tape along the mark and attach the edge of the banner to the tape.

A 3×8 banner should be easily finished in five to ten minutes, which is much preferable to waiting for 24 hours or more if you send it out to be sewn. Even if you have this capability in-house, there is far more time and labor required to sew a banner.

Banner tape is less than 30 cents per linear foot, so the cost of finishing with it is minimal. “My six-year-old son can use banner tape, but he can’t use a sewing machine,” says LexJet’s product manager, Jeff Leto.

“The only time I would think someone would want a sewn banner is if that’s the look they want, so there’s no other reason why you wouldn’t use banner tape as a direct replacement for sewing,” says Leto. “The only thing to keep in mind about banner tape is if you make a pole pocket and stick ropes through the pocket instead of a pole. At the ends of the banner where it’s folded over on the corners, they will need to be re-enforced. You can either reinforce the corners with a grommet, or a single stitch with carpet thread. This will prevent the corners from lifting.”

If you’re installing the banner with ropes, or something similar, Leto says it’s preferable to run the rope through pole pockets as opposed to looping rope through grommets on the four corners of the banner and it tying them off. Instead, run the rope through the pockets. This makes the tension across the banner even, as opposed to all of the tension being placed on the grommets at the four corners.

Another method is to attach bungee cords to the four corners since the bungee cords will give in the wind and distribute the tension evenly along the banner. Furthermore, this method is much more preferable to cutting wind holes, which looks bad and effectively lowers the lifespan of the material.

“The nice thing about banner tape is that it fits all of the potential environments in which you would install a banner. There’s a reason why you’d use Tyvek, polypropylene, a 500×500 denier vinyl, or a 1000×1000 denier vinyl in different application situations, but there’s one product you can use to hem all of them in any environment,” says Leto.

Regan has been involved in the sign and wide format digital printing industries for the past two decades as an editor, writer and pundit. With a degree in journalism from the University of Houston, Regan has reported on the full evolution of the inkjet printing industry since the first digital printers began appearing on the scene.

Leave a comment

Please be polite. We appreciate that. Your email address will not be published and required fields are marked

*